TUTO adb, fastboot pour appareils xiaomi sous linux

Discussion dans 'Tutoriels Rom Globale' créé par minux, 5 Avril 2016.


  1. Il semble que vous ne soyez pas membre de ce forum ou un membre récent.
    Sachez que seuls les membres enregistrés et ayant un minimum de 3 messages peuvent télécharger les ressources additionnelles tels les thèmes ou les mods.
    Enregistrez-vous dès à présent!
  2. Merci d'utiliser la fonction "RECHERCHE" en haut à droite de la page d'accueil. Quelqu'un a peut être eu la même question que vous et vous aurez une solution plus rapidement ainsi :-)
  3. Les nouveaux membres ou ceux disposant de moins de 3 messages sont particulièrement incités à lire la charte du forum qui contient les quelques règles applicables sur ce forum.
    Son non-respect peut entraîner des sanctions pouvant aller jusqu'au bannissement total dans le cas de récidive.
    Merci de noter que ne sont bienvenues ici que les personnes susceptibles de contribuer ici au bien-être et la convivialité au sein de la communauté. Toute personne utilisant ce site et ce forum uniquement pour nuire aux autres est priée de passer son chemin.
  1. Patrick's Mi3

    Patrick's Mi3 Membre

    19 Mai 2014
    13
    4
    3
    Homme
    udev n'est pas un ficher c'est une commande
     
  2. psklb

    psklb Membre

    6 Novembre 2016
    7
    0
    1
    Homme
    mouais... Ogu parlait du fichier ".rules" qui va permettre à udev de reconnaître son tél.
    Tu avais compris non ?
    Si on pinaille, udev n'est pas une commande non plus. T'as déjà lancé udev ? ;-)
    Maintenant ça lui donnera l'occasion de recevoir une notification et de répondre pour avoir ses trois messages !
    Bon we
    Pskl
     
  3. ogu

    ogu Membre

    28 Mai 2016
    10
    3
    3
    Homme
    #23 ogu, 7 Octobre 2017
    Dernière édition: 7 Octobre 2017
    Re!

    Oui je parlais du fichier de règles dans le gestionnaire de périphérique, en effet...Je ferai plus attention à ma précision à l'avenir ^^!

    Bref, j'ai fini par le télécharger, j'ai suivi à la lettre les indications mais :
    -la ROM refuse de s'installer car elle indique que le "device is blocked". Pourtant j'avais unlocké le bootloader.
    -Retour sur Windows pour redéblocker le bootloader qui s'était verrouillé tout seul lors du brick, j'imagine. Sauf qu'il estimpossible d'utiliser Fl'outil d'unlockage sans activer une fonction dans les paramètres du téléphone (téléphone quine démarre plus...)

    Je me retrouve donc dans un cycle infernal : faute de pouvoir démarrer le smartphone je ne peux pas déverrouiller le bootloader pour ensuite flasher une nouvelle ROM, qui m'aurait permis de rentrer dans les réglages du téléphone pour unlocker le bootloader....Merci XIAOMI, on se croirait dans la maison qui rend fou dans les 12 travaux d'Asterix!


    Bef j'ai abandonné après des heures de tentatives et recherches diverses, j'ai tout essayé sauf les solutions matérielles avec démontage du tél. Même les ROM de ManHit prévues pour le bootloader locké ne fonctionnent pas faute d'avoir un démarrage en EDL (ne me demandez pas pourquoi les commandes EDL n'aboutissent à rien...), TWRP refuse de s'installer car le "device is locked", bref je suis à court de compétences...
     
  4. Patrick's Mi3

    Patrick's Mi3 Membre

    19 Mai 2014
    13
    4
    3
    Homme
    Bonjour,

    Tu ne suis pas la bonne procédure à mon avis. Si tu as réellement débloqué le bootloader tu peux réinstaller la rom. A chaque réinstallation d'une ROM Xiaomi elle remplace le recovery TWRP ou autre. Je pense que tu confonds le recovery et le bootloader. Si le bootloader du redmi pro est locké c'est xiaomi qui peut le débloquer (tu cherches sur les forume la procédure).
    Tu ne dois pas installer TWRP dans un premier temps.
    Tu l'installe provisoirement sur ton ordi pour qu'il installe le dernier programme SU qui "rootera" ton appareil. Ensuite si tu as envie tu peux installer twrp sur ton appareil. Suit cette procédure :
    This content is protected


    Bonne chance
     
  5. ogu

    ogu Membre

    28 Mai 2016
    10
    3
    3
    Homme
    Re!

    Le bootloader a bien été déloqué par mes soins, puis j'ai flashé une ROM avec TWRp en suivant un tuto, tout s'est bien déroulé sauf qu'au reboot je me suis retrouvé avec un brick et le bootloder revérouillé...

    Il m'est maintenant interdit de débloquer le bootloader vu qu'il faudrait pour se faire aller activer un réglage sur le téléphone (qui ne démarre plus vu qu'il bootloope, sauf en fastboot)

    Le serpent se mort la queue!

    Adb ne reconnait pas mon device malgré mille tentatives et tips divers. Au mieux me signale-t-il qu'il est "unauthorized".
    Même chose pour Fastboot, les commandes ne passent pas car le "device is locked"
    EDL ne démarre pas.
    Le Recovery non plus, et une alternative à ce recovery genre TWRP ne peut etre installé vu que le bootloader s'est verrouillé tout seul...
     
  6. Patrick's Mi3

    Patrick's Mi3 Membre

    19 Mai 2014
    13
    4
    3
    Homme
    Si tu accèdes au Fastboot, tu devrais pourvoir installer la dernière ROM Xiaomi.
    Essaye de chercher dans les types de commandes fastboot, voilà ce que j'avais trouvé il y a un bon moment en anglais :

    - launch minimal adb tool
    - type : adb devices (to list phone connected) it will appear "unauthorized"
    - on the phone : accept the computer
    - re type : adb devices
    it has changed in "authorized"
    - type : adb reboot bootloader
    it will go in fastboot mode : the same that power + vol down
    - type : fastboot devices
    your phone will appear as in adb mode (unless the bad signed driver is choosen in win10 ; i will not repeat it again)
    - type : fastboot oem device-info (verify if bootloader is locked or unlocked)
    now, we go to root
    - type : fastboot boot twrp.img (if it is your renamed twrp copied in the minimal adb folder)
     
  7. Patrick's Mi3

    Patrick's Mi3 Membre

    19 Mai 2014
    13
    4
    3
    Homme
    Bon je te donne la procédure pas à pas :

    Tout d'abord tu dois télécharger le dernier fichier TWRP pour ton téléphone ou ta tablette, tu cherches sous Google.
    Ensuite il te faut le dernier SuperSU que tu trouves aussi grâce à Google.

    Il faut aller chercher l’image achive de la ROM ici (Global developper) :

    This content is protected


    Télécharger un fichier : .tgz pui le décompresser.

    Cela donne un fichier type (Cela c'est pour mon Mi3) :

    cancro_global_images_7.9.22_20170922.0000.00_6.0_global_5912c67157.tgz

    puis décompresser un on a un dossier :

    cancro_global_images_7.9.22_20170922.0000.00_6.0_global

    Il faut mettre le téléphone en fastboot :

    adb reboot bootloader

    Il faut rentrer dans le dossier où l’on a décompressé la ROM (cancro_global_images_7.9.22_20170922.0000.00_6.0_global) sous un terminal et taper la commande :

    bash flash_all_except_data_storage.sh

    Cela installe la dernière ROM en conservant les données.

    Il faut ensuite démarrer ton téléphone et installer à la racine le dernier fichier SuperSU.zip

    Puis on peut faire :

    adb reboot bootloader


    Cela fait passer le téléphone en mode fastboot

    Puis on va dans un terminal et l'on se place dans le répertoire où tu as téléchargé le dernier TWRP :
    Par exemple :
    cd Téléchargements/

    Et toujours dans le terminal on tape :

    fastboot boot twrp-3.1.1-0-cancro.img (ou la dernière version de TWRP)

    Là TWRP s’installe sur le téléphone et on peut installer SuperSU directement depuis ton téléphone. A la fin du processus tu peux installer TWRP comme application système ce qui remplacera le Recovery de Xiaomi et effacer le Dalvik cache.
    Ensuite tu redémarres et tu as un téléphone rooté arve TWRP à la place du recvoery (tu peux aussi laisser le recovery de Xiaomi cela ne change rien, il est rooté dans tous les cas grâce à Super SU).
     
  8. ogu

    ogu Membre

    28 Mai 2016
    10
    3
    3
    Homme
    Merci pour vos réponses!

    Jrai déjà essayé toutes ces méthodes, que je ne découvre pas pour avoir déjà flashé des ZTE ou des tablettes CUBE. Mais


    Le téléphone ne démarre plus, je n'aidonc aucun accès à la pop-up d'acceptation (et pas davantage au réglage développeur pour unlocker le bootloader, d'ailleurs)

    C'est bien ce que j'avais fait, et le tél a brické au reboot. Depuis il m'est impossible d'essayer à nouveau car TWRP ne peut pas s'installer et m'indique que "the device is locked".

    Je me répète mais en fait faute d'avoir accès au système Android et vu que le bootloader s'est verrouillé seul en brickant, aucune méthode ne marche, soit qu'il me faille un accès à l'OS que je n'ai plus, soit que le bootloader bloque toute installation, soit qu'ADB refuse obstinément de reconnaitre le périphérique, tant sous Windows que sous Linux et malgré mille manipulations, soit que le mode EDL ne démarre pas.


    A part le démontage du téléphone en suivant un tuto, je crois que je ne peux plus rien faire du tout. Il me manque encore à essayer sous un Windows 64 bits mais je n'ai guère d'espoir...


    Merci mille fois en tout cas !!
     
  9. Patrick's Mi3

    Patrick's Mi3 Membre

    19 Mai 2014
    13
    4
    3
    Homme
    Je crois que tu as tout essayé. Tout de même :
    Sous Linux, je n'ai pas besoin de confirmer, il n'y a pas de pop-up.
    Ensuite je me demande si tu as bien tapé la commande suivante :
    fastboot boot twrp-3.1.1-0-cancro.img

    La commande BOOT n'installe pas twrp sur ton téléphone, cela le démarre depuis l'ordinateur donc en principe cela fonctionne même sur un téléphone locké.
    tu peux essayé si tu ne l'a pas déjà fait.

    Bonne chance...
     
  10. ogu

    ogu Membre

    28 Mai 2016
    10
    3
    3
    Homme
    Salut!

    J'au testé ton dernier conseil mais nouvel échec :

    ogu@ogubuntu:~/a/$ fastboot boot twrp-3.0.2-0-ido.img
    downloading 'boot.img'...
    OKAY [ 0.444s]
    booting...
    FAILED (remote: unlock device to use this command)
    finished. total time: 0.445s

    De guerre lasse j'ai fini par commander un REDMI 4x sur Aliexpress, avec un Global ROM cette fois-ci...
    Merci beaucoup pour le suivi et la qualité du forum!
     
  11. Patrick's Mi3

    Patrick's Mi3 Membre

    19 Mai 2014
    13
    4
    3
    Homme
    Là je suis à court d'idées... C'est un peu dommage pour ton tél. La seule idée qui me reste :
    Essayer avec la dernière verstion de TWRP que tu trouveras ici :
    This content is protected


    Sur la page de TWRP ils disent aussi que parfois il faut essayer avec une ancienne version soit encore celle-ci qui est intermédiaire entre la tienne et celle dont je viens de te donner le lien :
    This content is protected
     
  12. JacKk

    JacKk Membre actif

    15 Avril 2012
    26
    1
    3
    Homme
    Rennes
    Salut,

    Je ne peux pas flasher le recovery,"adb devices "ne me renvoie rien!

    Pour moi,il faudrait que je réinstalle une miui,qui me lock le bootloader,afin de revenir a l état d origine,mais quelle versiin fait cela?jai essaye,les rom chinoises ,dev,etc...mais rienJ ai encore la chance,j ai accès au recovery,et je peux télécharger des rom.,jusqu'à la version 7.1.2.pour la version 8 il me faut le dernier twrp ...et la ,ça bloque !
     
  13. minux

    minux Étre, avoir été ou devenir ?
    Membre du personnel

    28 Juillet 2011
    23 788
    4 638
    163
    Homme
    IDF
    si adb ne renvoies rien, c'est soit que adb n'est pas activé dans les options dev, soit que linux n'a pas pris en compte les appareils xioami.

    Quel linux utilises-tu ?
     
  14. JacKk

    JacKk Membre actif

    15 Avril 2012
    26
    1
    3
    Homme
    Rennes
    #34 JacKk, 30 Juin 2018
    Dernière édition: 30 Juin 2018
    Salut,

    Désolé du retard de réponse,je sais pas comment ce poste est arrivé la!j avais creer ici:
    This content is protected

    bref!

    Si,adb est bien activé dans "option dev"

    La version est la derniére 18.04 LTS a jour.

    MTP ne ce connect pas au pc
     

    Fichiers attachés:

  15. minux

    minux Étre, avoir été ou devenir ?
    Membre du personnel

    28 Juillet 2011
    23 788
    4 638
    163
    Homme
    IDF
    Que donne un lsusb

    Envoyé de mon Mi MIX 2 en utilisant Tapatalk
     
  16. JacKk

    JacKk Membre actif

    15 Avril 2012
    26
    1
    3
    Homme
    Rennes
    Je suis sur un usb 2,avec le cable d origine,et le téléphone prend la charge!j entend le son du téléphone quand je connecte,mais pas sur l ordinateur.
    Quand je débranches l usb,j ai toujours les 6 ligne de la commande lsub
     

    Fichiers attachés:

    • lusb.png
      lusb.png
      Taille de fichier:
      52.8 KB
      Affichages:
      5
  17. minux

    minux Étre, avoir été ou devenir ?
    Membre du personnel

    28 Juillet 2011
    23 788
    4 638
    163
    Homme
    IDF
    T'as essayé un autre cable ou un autre port usb, là il voit rien d3 branché. Tu branches et tu fais un dmesg pour qu'on voit ce qui se passe côté système

    Envoyé de mon Mi MIX 2 en utilisant Tapatalk
     
  18. JacKk

    JacKk Membre actif

    15 Avril 2012
    26
    1
    3
    Homme
    Rennes
    merci pour ta patience,mais le retour de commande m
    Salut,
    Oui testé sur different port avec divers cable,linux et windows,install propre depuis peu!
    bon,voici le retour de commande,ca pique!!!

    Code:
    pcportable@pcportable:~$ dmesg
    [	0.000000] microcode: microcode updated early to revision 0x2d, date = 2018-02-07
    [	0.000000] Linux version 4.15.0-23-generic (buildd@lgw01-amd64-055) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #25-Ubuntu SMP Wed May 23 18:02:16 UTC 2018 (Ubuntu 4.15.0-23.25-generic 4.15.18)
    [	0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=15623012-80e6-4c6c-a504-9e29266df2cd ro quiet splash
    [	0.000000] KERNEL supported cpus:
    [	0.000000]   Intel GenuineIntel
    [	0.000000]   AMD AuthenticAMD
    [	0.000000]   Centaur CentaurHauls
    [	0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
    [	0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
    [	0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
    [	0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
    [	0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
    [	0.000000] e820: BIOS-provided physical RAM map:
    [	0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [	0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [	0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [	0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009ce3efff] usable
    [	0.000000] BIOS-e820: [mem 0x000000009ce3f000-0x000000009cebefff] reserved
    [	0.000000] BIOS-e820: [mem 0x000000009cebf000-0x000000009cfbefff] ACPI NVS
    [	0.000000] BIOS-e820: [mem 0x000000009cfbf000-0x000000009cffefff] ACPI data
    [	0.000000] BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
    [	0.000000] BIOS-e820: [mem 0x000000009d000000-0x000000009f9fffff] reserved
    [	0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [	0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
    [	0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [	0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
    [	0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [	0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [	0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
    [	0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000015fdfffff] usable
    [	0.000000] NX (Execute Disable) protection: active
    [	0.000000] random: fast init done
    [	0.000000] SMBIOS 2.7 present.
    [	0.000000] DMI: Dell Inc. XPS L412Z/01F22F, BIOS A03 11/15/2011
    [	0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [	0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [	0.000000] e820: last_pfn = 0x15fe00 max_arch_pfn = 0x400000000
    [	0.000000] MTRR default type: uncachable
    [	0.000000] MTRR fixed ranges enabled:
    [	0.000000]   00000-9FFFF write-back
    [	0.000000]   A0000-BFFFF uncachable
    [	0.000000]   C0000-E7FFF write-protect
    [	0.000000]   E8000-EFFFF write-combining
    [	0.000000]   F0000-FFFFF write-protect
    [	0.000000] MTRR variable ranges enabled:
    [	0.000000]   0 base 000000000 mask F80000000 write-back
    [	0.000000]   1 base 080000000 mask FE0000000 write-back
    [	0.000000]   2 base 09D000000 mask FFF000000 uncachable
    [	0.000000]   3 base 09E000000 mask FFE000000 uncachable
    [	0.000000]   4 base 0FFC00000 mask FFFC00000 write-protect
    [	0.000000]   5 base 100000000 mask FC0000000 write-back
    [	0.000000]   6 base 140000000 mask FE0000000 write-back
    [	0.000000]   7 base 15FE00000 mask FFFE00000 uncachable
    [	0.000000]   8 disabled
    [	0.000000]   9 disabled
    [	0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
    [	0.000000] e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
    [	0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [		(ptrval)]
    [	0.000000] Scanning 1 areas for low memory corruption
    [	0.000000] Base memory trampoline at [		(ptrval)] 97000 size 24576
    [	0.000000] reserving inaccessible SNB gfx pages
    [	0.000000] BRK [0x81f3f000, 0x81f3ffff] PGTABLE
    [	0.000000] BRK [0x81f40000, 0x81f40fff] PGTABLE
    [	0.000000] BRK [0x81f41000, 0x81f41fff] PGTABLE
    [	0.000000] BRK [0x81f42000, 0x81f42fff] PGTABLE
    [	0.000000] BRK [0x81f43000, 0x81f43fff] PGTABLE
    [	0.000000] BRK [0x81f44000, 0x81f44fff] PGTABLE
    [	0.000000] RAMDISK: [mem 0x31929000-0x34c8bfff]
    [	0.000000] ACPI: Early table checksum verification disabled
    [	0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 DELL  )
    [	0.000000] ACPI: XSDT 0x000000009CFFE120 000084 (v01 DELL   CL09	 00000001	  01000013)
    [	0.000000] ACPI: FACP 0x000000009CFFB000 0000F4 (v04 DELL   CL09	 00000001 ASL  00040000)
    [	0.000000] ACPI: DSDT 0x000000009CFEF000 008FDC (v01 DELL   CL09	 00000000 ASL  00040000)
    [	0.000000] ACPI: FACS 0x000000009CF6C000 000040
    [	0.000000] ACPI: FACS 0x000000009CF6C000 000040
    [	0.000000] ACPI: SLIC 0x000000009CFFD000 000176 (v01 DELL   CL09	 00000001 ASL  00040000)
    [	0.000000] ACPI: ASF! 0x000000009CFFC000 0000A5 (v32 DELL   CL09	 00000001 ASL  00040000)
    [	0.000000] ACPI: HPET 0x000000009CFFA000 000038 (v01 DELL   CL09	 00000001 ASL  00040000)
    [	0.000000] ACPI: APIC 0x000000009CFF9000 00008C (v02 DELL   CL09	 00000001 ASL  00040000)
    [	0.000000] ACPI: MCFG 0x000000009CFF8000 00003C (v01 DELL   CL09	 00000001 ASL  00040000)
    [	0.000000] ACPI: SSDT 0x000000009CFED000 001068 (v01 INSYDE H2O BIOS 00001000 ACPI 00040000)
    [	0.000000] ACPI: BOOT 0x000000009CFEB000 000028 (v01 DELL   CL09	 00000001 ASL  00040000)
    [	0.000000] ACPI: ASPT 0x000000009CFE8000 000034 (v07 DELL   CL09	 00000001 ASL  00040000)
    [	0.000000] ACPI: MSDM 0x000000009CFE7000 000055 (v03 DELL   CL09	 00000001 ASL  00040000)
    [	0.000000] ACPI: SSDT 0x000000009CFE6000 000996 (v01 PmRef  CpuPm	00003000 INTL 20100121)
    [	0.000000] ACPI: SSDT 0x000000009CFE1000 004916 (v01 NvdRef NvdTabl  00001000 INTL 20100121)
    [	0.000000] ACPI: Local APIC address 0xfee00000
    [	0.000000] No NUMA configuration found
    [	0.000000] Faking a node at [mem 0x0000000000000000-0x000000015fdfffff]
    [	0.000000] NODE_DATA(0) allocated [mem 0x15fdd2000-0x15fdfcfff]
    [	0.000000] tsc: Fast TSC calibration using PIT
    [	0.000000] Zone ranges:
    [	0.000000]   DMA	  [mem 0x0000000000001000-0x0000000000ffffff]
    [	0.000000]   DMA32	[mem 0x0000000001000000-0x00000000ffffffff]
    [	0.000000]   Normal   [mem 0x0000000100000000-0x000000015fdfffff]
    [	0.000000]   Device   empty
    [	0.000000] Movable zone start for each node
    [	0.000000] Early memory node ranges
    [	0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
    [	0.000000]   node   0: [mem 0x0000000000100000-0x000000009ce3efff]
    [	0.000000]   node   0: [mem 0x000000009cfff000-0x000000009cffffff]
    [	0.000000]   node   0: [mem 0x0000000100000000-0x000000015fdfffff]
    [	0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000015fdfffff]
    [	0.000000] On node 0 totalpages: 1035228
    [	0.000000]   DMA zone: 64 pages used for memmap
    [	0.000000]   DMA zone: 156 pages reserved
    [	0.000000]   DMA zone: 3996 pages, LIFO batch:0
    [	0.000000]   DMA32 zone: 9977 pages used for memmap
    [	0.000000]   DMA32 zone: 638528 pages, LIFO batch:31
    [	0.000000]   Normal zone: 6136 pages used for memmap
    [	0.000000]   Normal zone: 392704 pages, LIFO batch:31
    [	0.000000] Reserved but unavailable: 100 pages
    [	0.000000] Reserving Intel graphics memory at 0x000000009da00000-0x000000009f9fffff
    [	0.000000] ACPI: PM-Timer IO Port: 0x408
    [	0.000000] ACPI: Local APIC address 0xfee00000
    [	0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
    [	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [	0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [	0.000000] ACPI: IRQ0 used by override.
    [	0.000000] ACPI: IRQ9 used by override.
    [	0.000000] Using ACPI (MADT) for SMP configuration information
    [	0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [	0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [	0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    [	0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [	0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [	0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [	0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [	0.000000] PM: Registered nosave memory: [mem 0x9ce3f000-0x9cebefff]
    [	0.000000] PM: Registered nosave memory: [mem 0x9cebf000-0x9cfbefff]
    [	0.000000] PM: Registered nosave memory: [mem 0x9cfbf000-0x9cffefff]
    [	0.000000] PM: Registered nosave memory: [mem 0x9d000000-0x9f9fffff]
    [	0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
    [	0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
    [	0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
    [	0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
    [	0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
    [	0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [	0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
    [	0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
    [	0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
    [	0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [	0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [	0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [	0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
    [	0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
    [	0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
    [	0.000000] Booting paravirtualized kernel on bare hardware
    [	0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
    [	0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
    [	0.000000] percpu: Embedded 46 pages/cpu @		(ptrval) s151552 r8192 d28672 u262144
    [	0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
    [	0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
    [	0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1018895
    [	0.000000] Policy zone: Normal
    [	0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-23-generic root=UUID=15623012-80e6-4c6c-a504-9e29266df2cd ro quiet splash
    [	0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [	0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [	0.000000] Memory: 3926500K/4140912K available (12300K kernel code, 2470K rwdata, 4240K rodata, 2408K init, 2416K bss, 214412K reserved, 0K cma-reserved)
    [	0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [	0.000000] Kernel/User page tables isolation: enabled
    [	0.000000] ftrace: allocating 39083 entries in 153 pages
    [	0.000000] Hierarchical RCU implementation.
    [	0.000000]	 RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
    [	0.000000]	 Tasks RCU enabled.
    [	0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [	0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
    [	0.000000] Console: colour VGA+ 80x25
    [	0.000000] console [tty0] enabled
    [	0.000000] ACPI: Core revision 20170831
    [	0.000000] ACPI: 4 ACPI AML tables successfully acquired and loaded
    [	0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
    [	0.000000] hpet clockevent registered
    [	0.000000] APIC: Switch to symmetric I/O mode setup
    [	0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
    [	0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [	0.020000] tsc: Fast TSC calibration using PIT
    [	0.024000] tsc: Detected 2394.541 MHz processor
    [	0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.08 BogoMIPS (lpj=9578164)
    [	0.024000] pid_max: default: 32768 minimum: 301
    [	0.024000] Security Framework initialized
    [	0.024000] Yama: becoming mindful.
    [	0.024000] AppArmor: AppArmor initialized
    [	0.028826] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [	0.029571] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [	0.029623] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [	0.029649] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
    [	0.030214] CPU: Physical Processor ID: 0
    [	0.030216] CPU: Processor Core ID: 0
    [	0.030230] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    [	0.030231] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [	0.030241] mce: CPU supports 7 MCE banks
    [	0.030277] process: using mwait in idle threads
    [	0.030284] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
    [	0.030286] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
    [	0.030291] Spectre V2 : Mitigation: Full generic retpoline
    [	0.030293] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
    [	0.030294] Spectre V2 : Enabling Restricted Speculation for firmware calls
    [	0.030296] Speculative Store Bypass: Vulnerable
    [	0.030630] Freeing SMP alternatives memory: 36K
    [	0.036172] TSC deadline timer enabled
    [	0.036179] smpboot: CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (family: 0x6, model: 0x2a, stepping: 0x7)
    [	0.036375] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
    [	0.036442] ... version:				3
    [	0.036444] ... bit width:			  48
    [	0.036446] ... generic registers:	  4
    [	0.036449] ... value mask:			 0000ffffffffffff
    [	0.036451] ... max period:			 00007fffffffffff
    [	0.036453] ... fixed-purpose events:   3
    [	0.036455] ... event mask:			 000000070000000f
    [	0.036552] Hierarchical SRCU implementation.
    [	0.039748] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
    [	0.039792] smp: Bringing up secondary CPUs ...
    [	0.040000] x86: Booting SMP configuration:
    [	0.040000] .... node  #0, CPUs:	  #1 #2 #3
    [	0.050403] smp: Brought up 1 node, 4 CPUs
    [	0.050403] smpboot: Max logical packages: 2
    [	0.050403] smpboot: Total of 4 processors activated (19156.32 BogoMIPS)
    [	0.052639] devtmpfs: initialized
    [	0.052639] x86/mm: Memory block size: 128MB
    [	0.053340] evm: security.selinux
    [	0.053342] evm: security.SMACK64
    [	0.053344] evm: security.SMACK64EXEC
    [	0.053345] evm: security.SMACK64TRANSMUTE
    [	0.053347] evm: security.SMACK64MMAP
    [	0.053349] evm: security.apparmor
    [	0.053350] evm: security.ima
    [	0.053352] evm: security.capability
    [	0.053396] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes)
    [	0.053396] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
    [	0.053396] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [	0.053396] pinctrl core: initialized pinctrl subsystem
    [	0.053396] RTC time:  7:43:56, date: 07/02/18
    [	0.053396] NET: Registered protocol family 16
    [	0.053396] audit: initializing netlink subsys (disabled)
    [	0.053396] audit: type=2000 audit(1530517436.052:1): state=initialized audit_enabled=0 res=1
    [	0.056124] cpuidle: using governor ladder
    [	0.056124] cpuidle: using governor menu
    [	0.056124] Simple Boot Flag at 0x44 set to 0x1
    [	0.056124] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [	0.056126] ACPI: bus type PCI registered
    [	0.056129] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [	0.056295] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [	0.056313] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [	0.056313] PCI: Using configuration type 1 for base access
    [	0.056318] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
    [	0.056517] mtrr: your CPUs had inconsistent variable MTRR settings
    [	0.056519] mtrr: probably your BIOS does not setup all CPUs.
    [	0.056521] mtrr: corrected configuration.
    [	0.060552] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
    [	0.060552] ipmi:dmi: Invalid offset: 0
    [	0.060552] ACPI: Added _OSI(Module Device)
    [	0.060552] ACPI: Added _OSI(Processor Device)
    [	0.060552] ACPI: Added _OSI(3.0 _SCP Extensions)
    [	0.060552] ACPI: Added _OSI(Processor Aggregator Device)
    [	0.060872] ACPI: Executed 1 blocks of module-level executable AML code
    [	0.077774] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
    [	0.080949] ACPI: Dynamic OEM Table Load:
    [	0.080973] ACPI: SSDT 0xFFFF9AB65A60B800 000727 (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
    [	0.082656] ACPI: Dynamic OEM Table Load:
    [	0.082671] ACPI: SSDT 0xFFFF9AB65A742600 000119 (v01 PmRef  ApCst	00003000 INTL 20100121)
    [	0.085943] ACPI: EC: EC started
    [	0.085945] ACPI: EC: interrupt blocked
    [	0.144561] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
    [	0.144567] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
    [	0.144572] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
    [	0.144574] ACPI: Interpreter enabled
    [	0.144645] ACPI: (supports S0 S3 S4 S5)
    [	0.144648] ACPI: Using IOAPIC for interrupt routing
    [	0.144742] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [	0.145539] ACPI: Enabled 12 GPEs in block 00 to 3F
    [	0.206563] acpi ABCDEFGH:00: ACPI dock station (docks/bays count: 1)
    [	0.223635] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
    [	0.223651] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [	0.223823] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [	0.225997] PCI host bridge to bus 0000:00
    [	0.226005] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
    [	0.226010] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
    [	0.226015] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
    [	0.226020] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
    [	0.226025] pci_bus 0000:00: root bus resource [bus 00-fe]
    [	0.226049] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
    [	0.226353] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
    [	0.226458] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [	0.226733] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
    [	0.226764] pci 0000:00:02.0: reg 0x10: [mem 0xb3400000-0xb37fffff 64bit]
    [	0.226780] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [	0.226792] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
    [	0.227250] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
    [	0.227306] pci 0000:00:16.0: reg 0x10: [mem 0xb5b04000-0xb5b0400f 64bit]
    [	0.227470] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [	0.227743] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
    [	0.227795] pci 0000:00:1b.0: reg 0x10: [mem 0xb5b00000-0xb5b03fff 64bit]
    [	0.227981] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [	0.228264] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
    [	0.228460] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [	0.228743] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
    [	0.228936] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [	0.229203] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
    [	0.229395] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [	0.229669] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
    [	0.229874] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [	0.230153] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
    [	0.231550] pci 0000:00:1d.0: reg 0x10: [mem 0xb5b08000-0xb5b083ff]
    [	0.235509] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [	0.235779] pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
    [	0.236238] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
    [	0.236288] pci 0000:00:1f.2: reg 0x10: [io  0x5088-0x508f]
    [	0.236308] pci 0000:00:1f.2: reg 0x14: [io  0x5094-0x5097]
    [	0.236329] pci 0000:00:1f.2: reg 0x18: [io  0x5080-0x5087]
    [	0.236349] pci 0000:00:1f.2: reg 0x1c: [io  0x5090-0x5093]
    [	0.236370] pci 0000:00:1f.2: reg 0x20: [io  0x5060-0x507f]
    [	0.236390] pci 0000:00:1f.2: reg 0x24: [mem 0xb5b07000-0xb5b077ff]
    [	0.236507] pci 0000:00:1f.2: PME# supported from D3hot
    [	0.236754] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
    [	0.236802] pci 0000:00:1f.3: reg 0x10: [mem 0xb5b05000-0xb5b050ff 64bit]
    [	0.236855] pci 0000:00:1f.3: reg 0x20: [io  0x5040-0x505f]
    [	0.237277] pci 0000:01:00.0: [10de:1050] type 00 class 0x030000
    [	0.237313] pci 0000:01:00.0: reg 0x10: [mem 0xb2000000-0xb2ffffff]
    [	0.237334] pci 0000:01:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
    [	0.237355] pci 0000:01:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
    [	0.237369] pci 0000:01:00.0: reg 0x24: [io  0x4000-0x407f]
    [	0.237383] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [	0.237397] pci 0000:01:00.0: enabling Extended Tags
    [	0.248040] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [	0.248048] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
    [	0.248055] pci 0000:00:01.0:   bridge window [mem 0xb2000000-0xb30fffff]
    [	0.248063] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
    [	0.248305] pci 0000:07:00.0: [1969:1083] type 00 class 0x020000
    [	0.248493] pci 0000:07:00.0: reg 0x10: [mem 0xb5a00000-0xb5a3ffff 64bit]
    [	0.248552] pci 0000:07:00.0: reg 0x18: [io  0x3000-0x307f]
    [	0.249136] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [	0.260081] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [	0.260091] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
    [	0.260099] pci 0000:00:1c.0:   bridge window [mem 0xb5a00000-0xb5afffff]
    [	0.260540] pci 0000:08:00.0: [8086:0091] type 00 class 0x028000
    [	0.261055] pci 0000:08:00.0: reg 0x10: [mem 0xb5900000-0xb5901fff 64bit]
    [	0.262860] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
    [	0.272169] pci 0000:00:1c.2: PCI bridge to [bus 08]
    [	0.272183] pci 0000:00:1c.2:   bridge window [mem 0xb5900000-0xb59fffff]
    [	0.272383] pci 0000:09:00.0: [10ec:5209] type 00 class 0xff0000
    [	0.272439] pci 0000:09:00.0: reg 0x10: [mem 0xb4900000-0xb4900fff]
    [	0.272709] pci 0000:09:00.0: supports D1 D2
    [	0.272714] pci 0000:09:00.0: PME# supported from D1 D2 D3hot
    [	0.284046] pci 0000:00:1c.3: PCI bridge to [bus 09-0e]
    [	0.284055] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
    [	0.284064] pci 0000:00:1c.3:   bridge window [mem 0xb4900000-0xb58fffff]
    [	0.284078] pci 0000:00:1c.3:   bridge window [mem 0xb3800000-0xb47fffff 64bit pref]
    [	0.284271] pci 0000:0f:00.0: [104c:8241] type 00 class 0x0c0330
    [	0.284343] pci 0000:0f:00.0: reg 0x10: [mem 0xb4800000-0xb480ffff 64bit]
    [	0.284383] pci 0000:0f:00.0: reg 0x18: [mem 0xb4810000-0xb4811fff 64bit]
    [	0.284617] pci 0000:0f:00.0: supports D1 D2
    [	0.284622] pci 0000:0f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [	0.296050] pci 0000:00:1c.5: PCI bridge to [bus 0f]
    [	0.296065] pci 0000:00:1c.5:   bridge window [mem 0xb4800000-0xb48fffff]
    [	0.325674] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [	0.325924] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [	0.326168] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
    [	0.326412] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [	0.326651] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
    [	0.326897] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [	0.327144] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
    [	0.327390] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
    [	0.327894] ACPI: EC: interrupt unblocked
    [	0.327909] ACPI: EC: event unblocked
    [	0.327924] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x17, EC_CMD/EC_SC=0x66, EC_DATA=0x62
    [	0.327929] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
    [	0.328575] SCSI subsystem initialized
    [	0.328613] libata version 3.00 loaded.
    [	0.328613] pci 0000:00:02.0: vgaarb: setting as boot VGA device
    [	0.328613] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
    [	0.328613] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
    [	0.328613] pci 0000:01:00.0: vgaarb: bridge control possible
    [	0.328613] pci 0000:00:02.0: vgaarb: no bridge control possible
    [	0.328613] vgaarb: loaded
    [	0.328613] ACPI: bus type USB registered
    [	0.328613] usbcore: registered new interface driver usbfs
    [	0.328613] usbcore: registered new interface driver hub
    [	0.328613] usbcore: registered new device driver usb
    [	0.328613] EDAC MC: Ver: 3.0.0
    [	0.328613] PCI: Using ACPI for IRQ routing
    [	0.347082] PCI: pci_cache_line_size set to 64 bytes
    [	0.347257] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [	0.347260] e820: reserve RAM buffer [mem 0x9ce3f000-0x9fffffff]
    [	0.347264] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
    [	0.347267] e820: reserve RAM buffer [mem 0x15fe00000-0x15fffffff]
    [	0.347529] NetLabel: Initializing
    [	0.347532] NetLabel:  domain hash size = 128
    [	0.347533] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
    [	0.347579] NetLabel:  unlabeled traffic allowed by default
    [	0.347627] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [	0.347627] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [	0.349051] clocksource: Switched to clocksource hpet
    [	0.379001] VFS: Disk quotas dquot_6.6.0
    [	0.379060] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [	0.379320] AppArmor: AppArmor Filesystem Enabled
    [	0.379389] pnp: PnP ACPI init
    [	0.379842] system 00:00: [io  0x0680-0x069f] has been reserved
    [	0.379849] system 00:00: [io  0x1000-0x100f] has been reserved
    [	0.379859] system 00:00: [io  0x1010-0x1013] has been reserved
    [	0.379865] system 00:00: [io  0xffff] has been reserved
    [	0.379870] system 00:00: [io  0x0400-0x0453] has been reserved
    [	0.379875] system 00:00: [io  0x0458-0x047f] has been reserved
    [	0.379880] system 00:00: [io  0x0500-0x057f] has been reserved
    [	0.379886] system 00:00: [io  0x164e-0x164f] has been reserved
    [	0.379891] system 00:00: [io  0xff2c-0xff2f] has been reserved
    [	0.379908] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [	0.379993] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
    [	0.380177] system 00:02: [io  0x0454-0x0457] has been reserved
    [	0.380192] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [	0.408175] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
    [	0.408276] pnp 00:04: Plug and Play ACPI device, IDs DLL0522 PNP0f13 (active)
    [	0.408818] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [	0.408832] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
    [	0.408837] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
    [	0.408843] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
    [	0.408848] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
    [	0.408854] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
    [	0.408859] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
    [	0.408865] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
    [	0.408871] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
    [	0.408876] system 00:05: [mem 0x9fa00000-0x9fa00fff] has been reserved
    [	0.408890] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [	0.410262] system 00:06: [mem 0x20000000-0x201fffff] could not be reserved
    [	0.410268] system 00:06: [mem 0x40000000-0x401fffff] could not be reserved
    [	0.410282] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
    [	0.410354] pnp: PnP ACPI: found 7 devices
    [	0.419631] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
    [	0.419643] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
    [	0.419736] pci 0000:01:00.0: BAR 6: assigned [mem 0xb3000000-0xb307ffff pref]
    [	0.419743] pci 0000:00:01.0: PCI bridge to [bus 01-06]
    [	0.419749] pci 0000:00:01.0:   bridge window [io  0x4000-0x4fff]
    [	0.419757] pci 0000:00:01.0:   bridge window [mem 0xb2000000-0xb30fffff]
    [	0.419763] pci 0000:00:01.0:   bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
    [	0.419773] pci 0000:00:1c.0: PCI bridge to [bus 07]
    [	0.419780] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
    [	0.419791] pci 0000:00:1c.0:   bridge window [mem 0xb5a00000-0xb5afffff]
    [	0.419810] pci 0000:00:1c.2: PCI bridge to [bus 08]
    [	0.419821] pci 0000:00:1c.2:   bridge window [mem 0xb5900000-0xb59fffff]
    [	0.419840] pci 0000:00:1c.3: PCI bridge to [bus 09-0e]
    [	0.419846] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
    [	0.419858] pci 0000:00:1c.3:   bridge window [mem 0xb4900000-0xb58fffff]
    [	0.419867] pci 0000:00:1c.3:   bridge window [mem 0xb3800000-0xb47fffff 64bit pref]
    [	0.419880] pci 0000:00:1c.5: PCI bridge to [bus 0f]
    [	0.419892] pci 0000:00:1c.5:   bridge window [mem 0xb4800000-0xb48fffff]
    [	0.419913] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
    [	0.419918] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
    [	0.419923] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
    [	0.419928] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window]
    [	0.419932] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
    [	0.419937] pci_bus 0000:01: resource 1 [mem 0xb2000000-0xb30fffff]
    [	0.419941] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
    [	0.419946] pci_bus 0000:07: resource 0 [io  0x3000-0x3fff]
    [	0.419951] pci_bus 0000:07: resource 1 [mem 0xb5a00000-0xb5afffff]
    [	0.419956] pci_bus 0000:08: resource 1 [mem 0xb5900000-0xb59fffff]
    [	0.419960] pci_bus 0000:09: resource 0 [io  0x2000-0x2fff]
    [	0.419965] pci_bus 0000:09: resource 1 [mem 0xb4900000-0xb58fffff]
    [	0.419969] pci_bus 0000:09: resource 2 [mem 0xb3800000-0xb47fffff 64bit pref]
    [	0.419974] pci_bus 0000:0f: resource 1 [mem 0xb4800000-0xb48fffff]
    [	0.420322] NET: Registered protocol family 2
    [	0.420792] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
    [	0.420993] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
    [	0.421153] TCP: Hash tables configured (established 32768 bind 32768)
    [	0.421248] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [	0.421288] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [	0.421421] NET: Registered protocol family 1
    [	0.421460] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
    [	0.440349] pci 0000:07:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
    [	0.440915] PCI: CLS 64 bytes, default 64
    [	0.441020] Unpacking initramfs...
    [	3.005699] Freeing initrd memory: 52620K
    [	3.005727] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [	3.005735] software IO TLB [mem 0x98e3f000-0x9ce3f000] (64MB) mapped at [00000000dbb03cbe-00000000fb01e5c9]
    [	3.006153] Scanning for low memory corruption every 60 seconds
    [	3.007957] Initialise system trusted keyrings
    [	3.007976] Key type blacklist registered
    [	3.008092] workingset: timestamp_bits=36 max_order=20 bucket_order=0
    [	3.011480] zbud: loaded
    [	3.012915] squashfs: version 4.0 (2009/01/31) Phillip Lougher
    [	3.013277] fuse init (API version 7.26)
    [	3.016943] Key type asymmetric registered
    [	3.016947] Asymmetric key parser 'x509' registered
    [	3.017039] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
    [	3.017133] io scheduler noop registered
    [	3.017137] io scheduler deadline registered
    [	3.017256] io scheduler cfq registered (default)
    [	3.019375] intel_idle: MWAIT substates: 0x21120
    [	3.019378] intel_idle: v0.4.1 model 0x2A
    [	3.019806] intel_idle: lapic_timer_reliable_states 0xffffffff
    [	3.076152] ACPI: AC Adapter [ACAD] (on-line)
    [	3.076343] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
    [	3.076515] ACPI: Lid Switch [LID0]
    [	3.076659] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
    [	3.076827] ACPI: Power Button [PWRF]
    [	3.078355] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
    [	3.416785] ACPI: Battery Slot [BAT1] (battery present)
    [	3.417418] Linux agpgart interface v0.103
    [	3.422225] loop: module loaded
    [	3.422683] libphy: Fixed MDIO Bus: probed
    [	3.422686] tun: Universal TUN/TAP device driver, 1.6
    [	3.422795] PPP generic driver version 2.4.2
    [	3.422924] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [	3.422930] ehci-pci: EHCI PCI platform driver
    [	3.423323] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [	3.423338] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [	3.423364] ehci-pci 0000:00:1d.0: debug port 2
    [	3.427297] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [	3.427331] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb5b08000
    [	3.440050] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [	3.440170] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [	3.440176] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [	3.440180] usb usb1: Product: EHCI Host Controller
    [	3.440185] usb usb1: Manufacturer: Linux 4.15.0-23-generic ehci_hcd
    [	3.440189] usb usb1: SerialNumber: 0000:00:1d.0
    [	3.440499] hub 1-0:1.0: USB hub found
    [	3.440517] hub 1-0:1.0: 2 ports detected
    [	3.440831] ehci-platform: EHCI generic platform driver
    [	3.440856] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [	3.440874] ohci-pci: OHCI PCI platform driver
    [	3.440899] ohci-platform: OHCI generic platform driver
    [	3.440919] uhci_hcd: USB Universal Host Controller Interface driver
    [	3.441159] xhci_hcd 0000:0f:00.0: xHCI Host Controller
    [	3.441174] xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 2
    [	3.441420] xhci_hcd 0000:0f:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x04000000
    [	3.441908] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
    [	3.441914] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [	3.441918] usb usb2: Product: xHCI Host Controller
    [	3.441923] usb usb2: Manufacturer: Linux 4.15.0-23-generic xhci-hcd
    [	3.441927] usb usb2: SerialNumber: 0000:0f:00.0
    [	3.442193] hub 2-0:1.0: USB hub found
    [	3.442217] hub 2-0:1.0: 2 ports detected
    [	3.442451] xhci_hcd 0000:0f:00.0: xHCI Host Controller
    [	3.442462] xhci_hcd 0000:0f:00.0: new USB bus registered, assigned bus number 3
    [	3.442525] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
    [	3.442581] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
    [	3.442586] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [	3.442590] usb usb3: Product: xHCI Host Controller
    [	3.442595] usb usb3: Manufacturer: Linux 4.15.0-23-generic xhci-hcd
    [	3.442599] usb usb3: SerialNumber: 0000:0f:00.0
    [	3.442848] hub 3-0:1.0: USB hub found
    [	3.442870] hub 3-0:1.0: 2 ports detected
    [	3.443204] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [	3.482622] serio: i8042 KBD port at 0x60,0x64 irq 1
    [	3.482634] serio: i8042 AUX port at 0x60,0x64 irq 12
    [	3.482976] mousedev: PS/2 mouse device common for all mice
    [	3.484267] rtc_cmos 00:01: RTC can wake from S4
    [	3.484552] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
    [	3.484598] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
    [	3.484618] i2c /dev entries driver
    [	3.484756] device-mapper: uevent: version 1.0.3
    [	3.485005] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
    [	3.485018] intel_pstate: Intel P-state driver initializing
    [	3.485491] ledtrig-cpu: registered to indicate activity on CPUs
    [	3.485887] NET: Registered protocol family 10
    [	3.489806] Segment Routing with IPv6
    [	3.489829] NET: Registered protocol family 17
    [	3.489866] Key type dns_resolver registered
    [	3.490104] RAS: Correctable Errors collector initialized.
    [	3.490132] microcode: sig=0x206a7, pf=0x10, revision=0x2d
    [	3.490188] microcode: Microcode Update Driver: v2.2.
    [	3.490196] sched_clock: Marking stable (3490183374, 0)->(3491600413, -1417039)
    [	3.490404] registered taskstats version 1
    [	3.490416] Loading compiled-in X.509 certificates
    [	3.493049] Loaded X.509 cert 'Build time autogenerated kernel key: d77482c25b833df502ed38a87c5d7f330fdff3cb'
    [	3.493074] zswap: loaded using pool lzo/zbud
    [	3.496448] Key type big_key registered
    [	3.496452] Key type trusted registered
    [	3.498057] Key type encrypted registered
    [	3.498059] AppArmor: AppArmor sha1 policy hashing enabled
    [	3.498062] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
    [	3.498085] evm: HMAC attrs: 0x1
    [	3.498554]   Magic number: 10:579:722
    [	3.498566] block loop2: hash matches
    [	3.498659] rtc_cmos 00:01: setting system clock to 2018-07-02 07:44:00 UTC (1530517440)
    [	3.498721] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [	3.498721] EDD information not available.
    [	3.502134] Freeing unused kernel memory: 2408K
    [	3.529387] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
    [	3.536127] Write protecting the kernel read-only data: 20480k
    [	3.536754] Freeing unused kernel memory: 2008K
    [	3.541383] Freeing unused kernel memory: 1904K
    [	3.549056] x86/mm: Checked W+X mappings: passed, no W+X pages found.
    [	3.549057] x86/mm: Checking user space page tables
    [	3.556540] x86/mm: Checked W+X mappings: passed, no W+X pages found.
    [	3.688296] wmi_bus wmi_bus-PNP0C14:01: WQBC data block query control method not found
    [	3.688300] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
    [	3.764840] ahci 0000:00:1f.2: version 3.0
    [	3.765983] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
    [	3.765988] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
    [	3.777150] scsi host0: ahci
    [	3.777266] scsi host1: ahci
    [	3.777368] scsi host2: ahci
    [	3.777615] scsi host3: ahci
    [	3.780042] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [	3.780066] usb 2-1: new high-speed USB device number 2 using xhci_hcd
    [	3.789756] scsi host4: ahci
    [	3.792184] scsi host5: ahci
    [	3.792271] ata1: SATA max UDMA/133 abar m2048@0xb5b07000 port 0xb5b07100 irq 30
    [	3.792274] ata2: SATA max UDMA/133 abar m2048@0xb5b07000 port 0xb5b07180 irq 30
    [	3.792275] ata3: DUMMY
    [	3.792276] ata4: DUMMY
    [	3.792277] ata5: DUMMY
    [	3.792278] ata6: DUMMY
    [	3.806063] atl1c 0000:07:00.0: version 1.0.1.1-NAPI
    [	3.814404] atl1c 0000:07:00.0 enp7s0: renamed from eth0
    [	3.840957] [drm] Memory usable by graphics device = 2048M
    [	3.840960] [drm] Replacing VGA console driver
    [	3.841532] Console: switching to colour dummy device 80x25
    [	3.846095] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [	3.846097] [drm] Driver supports precise vblank timestamp query.
    [	3.846797] MXM: GUID detected in BIOS
    [	3.846871] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
    [	3.846928] ACPI: \_SB_.PCI0.GFX0: failed to evaluate _DSM
    [	3.848201] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20170831/nsarguments-100)
    [	3.848700] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
    [	3.848710] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
    [	3.848738] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
    [	3.848983] nouveau 0000:01:00.0: NVIDIA GF119 (0d9100a1)
    [	3.849642] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
    [	3.904406] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
    [	3.934744] usb 2-1: New USB device found, idVendor=0bda, idProduct=0811
    [	3.934747] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [	3.934748] usb 2-1: Product: 802.11ac WLAN Adapter 
    [	3.934750] usb 2-1: Manufacturer: Realtek 
    [	3.934751] usb 2-1: SerialNumber: 00e04c000001
    [	3.935671] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
    [	3.936378] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
    [	3.936381] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [	3.936669] hub 1-1:1.0: USB hub found
    [	3.936755] hub 1-1:1.0: 8 ports detected
    [	4.028028] tsc: Refined TSC clocksource calibration: 2394.560 MHz
    [	4.028037] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284248580e, max_idle_ns: 440795288736 ns
    [	4.049273] nouveau 0000:01:00.0: bios: version 75.19.23.00.03
    [	4.049957] ACPI: Video Device [PEGP] (multi-head: yes  rom: yes  post: no)
    [	4.054351] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input5
    [	4.055307] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
    [	4.056149] acpi device:3b: registered as cooling_device4
    [	4.056276] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6
    [	4.104564] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [	4.106446] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [	4.108191] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [	4.108266] ata1.00: supports DRM functions and may not be fully accessible
    [	4.108920] ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS30N, A101, max UDMA/133
    [	4.109117] ata1.00: disabling queued TRIM support
    [	4.109119] ata1.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
    [	4.109121] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [	4.110515] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [	4.110548] ata1.00: supports DRM functions and may not be fully accessible
    [	4.111174] ata1.00: disabling queued TRIM support
    [	4.112186] ata1.00: configured for UDMA/133
    [	4.113437] scsi 0:0:0:0: Direct-Access	 ATA	  Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
    [	4.113691] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [	4.113884] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
    [	4.113904] sd 0:0:0:0: [sda] Write Protect is off
    [	4.113907] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [	4.113940] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [	4.114051] ata2.00: configured for UDMA/133
    [	4.114590]  sda: sda1 sda2 sda3 sda4 < sda5 >
    [	4.115756] sd 0:0:0:0: [sda] supports TCG Opal
    [	4.115758] sd 0:0:0:0: [sda] Attached SCSI disk
    [	4.120514] scsi 1:0:0:0: CD-ROM			HL-DT-ST DVD+-RW GS30N	A101 PQ: 0 ANSI: 5
    [	4.178917] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
    [	4.188660] fbcon: inteldrmfb (fb0) is primary device
    [	4.227399] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
    [	4.227401] cdrom: Uniform CD-ROM driver Revision: 3.20
    [	4.227532] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [	4.227744] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [	4.242849] vga_switcheroo: enabled
    [	4.242989] [TTM] Zone  kernel: Available graphics memory: 1992738 kiB
    [	4.242990] [TTM] Initializing pool allocator
    [	4.242995] [TTM] Initializing DMA pool allocator
    [	4.243012] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
    [	4.243014] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
    [	4.243017] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
    [	4.243019] nouveau 0000:01:00.0: DRM: DCB version 4.0
    [	4.243021] nouveau 0000:01:00.0: DRM: DCB outp 00: 020003a6 0f220010
    [	4.243023] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000362 00020010
    [	4.243025] nouveau 0000:01:00.0: DRM: DCB conn 00: 00101046
    [	4.265533] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [	4.265533] [drm] Driver supports precise vblank timestamp query.
    [	4.336122] usb 1-1.4: new high-speed USB device number 3 using ehci-pci
    [	4.779018] usb 1-1.4: New USB device found, idVendor=174f, idProduct=143f
    [	4.779024] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [	4.779029] usb 1-1.4: Product: Laptop_Integrated_Webcam_1.3M
    [	4.779033] usb 1-1.4: Manufacturer: Sunplus IT Co 
    [	4.862874] Console: switching to colour frame buffer device 170x48
    [	4.882414] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [	4.883566] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
    [	4.944238] [drm] Cannot find any crtc or sizes
    [	4.944314] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
    [	5.008174] [drm] Cannot find any crtc or sizes
    [	5.056048] clocksource: Switched to clocksource tsc
    [	5.136613] [drm] Cannot find any crtc or sizes
    [	5.148026] usb 1-1.5: new full-speed USB device number 4 using ehci-pci
    [	5.230258] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
    [	5.265653] usb 1-1.5: New USB device found, idVendor=8086, idProduct=0189
    [	5.265655] usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
    [	5.364921] ip_tables: (C) 2000-2006 Netfilter Core Team
    [	5.371543] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
    [	5.388680] systemd[1]: Detected architecture x86-64.
    [	5.390735] systemd[1]: Set hostname to <pcportable>.
    [	5.489046] systemd[1]: Reached target Remote File Systems.
    [	5.489130] systemd[1]: Reached target User and Group Name Lookups.
    [	5.489182] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [	5.489372] systemd[1]: Created slice System Slice.
    [	5.489520] systemd[1]: Listening on Journal Audit Socket.
    [	5.489594] systemd[1]: Listening on Journal Socket (/dev/log).
    [	5.489666] systemd[1]: Listening on udev Control Socket.
    [	5.506762] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
    [	5.522224] lp: driver loaded but no devices found
    [	5.538688] ppdev: user-space parallel port driver
    [	5.588950] psmouse serio1: synaptics: queried max coordinates: x [..5674], y [..4776]
    [	5.603134] systemd-journald[278]: Received request to flush runtime journal from PID 1
    [	5.699530] psmouse serio1: synaptics: queried min coordinates: x [1268..], y [1078..]
    [	5.902713] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x22c00/0x0, board id: 1861, fw id: 910492
    [	5.915982] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [	5.990924] cfg80211: Loading compiled-in X.509 certificates for regulatory database
    [	6.008588] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
    [	6.017052] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
    [	6.017056] cfg80211: failed to load regulatory.db
    [	6.024371] Intel(R) Wireless WiFi driver for Linux
    [	6.024372] Copyright(c) 2003- 2015 Intel Corporation
    [	6.024613] iwlwifi 0000:08:00.0: can't disable ASPM; OS doesn't have ASPM control
    [	6.031408] iwlwifi 0000:08:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
    [	6.063266] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUG disabled
    [	6.063269] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
    [	6.063271] iwlwifi 0000:08:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
    [	6.063274] iwlwifi 0000:08:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0
    [	6.087097] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
    [	6.093931] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170831/utaddress-247)
    [	6.093942] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [	6.093945] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\GPRD) (20170831/utaddress-247)
    [	6.093952] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
    [	6.093959] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
    [	6.093965] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [	6.093967] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\GPRD) (20170831/utaddress-247)
    [	6.093972] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
    [	6.093979] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
    [	6.093985] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [	6.093986] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\GPRD) (20170831/utaddress-247)
    [	6.093992] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170831/utaddress-247)
    [	6.093998] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB.PCI0.PEG0.PEGP.GPIO) (20170831/utaddress-247)
    [	6.094004] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [	6.094005] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [	6.127871] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
    [	6.139949] media: Linux media interface: v0.10
    [	6.160391] Bluetooth: Core ver 2.22
    [	6.160412] NET: Registered protocol family 31
    [	6.160413] Bluetooth: HCI device and connection manager initialized
    [	6.160417] Bluetooth: HCI socket layer initialized
    [	6.160420] Bluetooth: L2CAP socket layer initialized
    [	6.160427] Bluetooth: SCO socket layer initialized
    [	6.165928] Linux video capture interface: v2.00
    [	6.174998] usbcore: registered new interface driver btusb
    [	6.201227] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (174f:143f)
    [	6.260573] input: Dell WMI hotkeys as /devices/platform/PNP0C14:01/wmi_bus/wmi_bus-PNP0C14:01/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input7
    [	6.263344] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
    [	6.279840] uvcvideo 1-1.4:1.0: Entity type for entity Extension 4 was not initialized!
    [	6.279844] uvcvideo 1-1.4:1.0: Entity type for entity Extension 3 was not initialized!
    [	6.279863] uvcvideo 1-1.4:1.0: Entity type for entity Processing 2 was not initialized!
    [	6.280049] uvcvideo 1-1.4:1.0: Entity type for entity Camera 1 was not initialized!
    [	6.280174] input: Laptop_Integrated_Webcam_1.3M:  as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input8
    [	6.280287] usbcore: registered new interface driver uvcvideo
    [	6.280288] USB Video Class driver (1.1.1)
    [	6.314329] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC259: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [	6.314332] snd_hda_codec_realtek hdaudioC0D0:	speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [	6.314334] snd_hda_codec_realtek hdaudioC0D0:	hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [	6.314335] snd_hda_codec_realtek hdaudioC0D0:	mono: mono_out=0x0
    [	6.314336] snd_hda_codec_realtek hdaudioC0D0:	inputs:
    [	6.314338] snd_hda_codec_realtek hdaudioC0D0:	  Mic=0x18
    [	6.314340] snd_hda_codec_realtek hdaudioC0D0:	  Internal Mic=0x12
    [	6.338152] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
    [	6.338154] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
    [	6.338155] RAPL PMU: hw unit of domain package 2^-16 Joules
    [	6.338156] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
    [	6.346681] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [	6.346772] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [	6.346854] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
    [	6.400694] AVX version of gcm_enc/dec engaged.
    [	6.400696] AES CTR mode by8 optimization enabled
    [	6.512548] kvm: disabled by bios
    [	6.577884] intel_rapl: Found RAPL domain package
    [	6.577886] intel_rapl: Found RAPL domain core
    [	6.577887] intel_rapl: Found RAPL domain uncore
    [	6.577894] intel_rapl: RAPL package 0 domain package locked by BIOS
    [	6.679120] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [	6.851500] iwlwifi 0000:08:00.0 wlp8s0: renamed from wlan0
    [	6.880322] Adding 4140028k swap on /dev/sda5.  Priority:-2 extents:1 across:4140028k SSFS
    [	6.953374] EXT4-fs (sda3): mounting ext3 file system using the ext4 subsystem
    [	6.960851] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
    [	7.019574] audit: type=1400 audit(1530517444.013:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=890 comm="apparmor_parser"
    [	7.019579] audit: type=1400 audit(1530517444.013:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=890 comm="apparmor_parser"
    [	7.019582] audit: type=1400 audit(1530517444.013:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=890 comm="apparmor_parser"
    [	7.019792] audit: type=1400 audit(1530517444.013:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4830/usr/lib/snapd/snap-confine" pid=887 comm="apparmor_parser"
    [	7.019796] audit: type=1400 audit(1530517444.013:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/core/4830/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=887 comm="apparmor_parser"
    [	7.021188] audit: type=1400 audit(1530517444.017:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=886 comm="apparmor_parser"
    [	7.021194] audit: type=1400 audit(1530517444.017:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=886 comm="apparmor_parser"
    [	7.021197] audit: type=1400 audit(1530517444.017:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=886 comm="apparmor_parser"
    [	7.021201] audit: type=1400 audit(1530517444.017:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=886 comm="apparmor_parser"
    [	7.023032] audit: type=1400 audit(1530517444.017:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=891 comm="apparmor_parser"
    [	7.346358] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [	7.346361] Bluetooth: BNEP filters: protocol multicast
    [	7.346365] Bluetooth: BNEP socket layer initialized
    [	7.742605] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
    [	7.762596] IPv6: ADDRCONF(NETDEV_UP): enp7s0: link is not ready
    [	7.769918] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
    [	7.782930] iwlwifi 0000:08:00.0: Radio type=0x1-0x2-0x0
    [	8.090133] iwlwifi 0000:08:00.0: Radio type=0x1-0x2-0x0
    [	8.173924] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
    [	8.245472] IPv6: ADDRCONF(NETDEV_UP): wlp8s0: link is not ready
    [   11.406027] wlp8s0: authenticate with 00:07:cb:01:c3:34
    [   11.410446] wlp8s0: send auth to 00:07:cb:01:c3:34 (try 1/3)
    [   11.413200] wlp8s0: authenticated
    [   11.416150] wlp8s0: associate with 00:07:cb:01:c3:34 (try 1/3)
    [   11.446245] wlp8s0: associate with 00:07:cb:01:c3:34 (try 2/3)
    [   11.449661] wlp8s0: RX AssocResp from 00:07:cb:01:c3:34 (capab=0x411 status=0 aid=7)
    [   11.451963] wlp8s0: associated
    [   13.966277] IPv6: ADDRCONF(NETDEV_CHANGE): wlp8s0: link becomes ready
    [   16.796827] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
    [   20.961959] nouveau 0000:01:00.0: devinit: 0x000062d3[0]: script needs connector type
    [   22.882419] Bluetooth: RFCOMM TTY layer initialized
    [   22.882804] Bluetooth: RFCOMM socket layer initialized
    [   22.882811] Bluetooth: RFCOMM ver 1.11
    [   24.417525] rfkill: input handler disabled
    [   27.804354] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
    [   38.903833] random: crng init done
    pcportable@pcportable:~$ 
    
     
  19. minux

    minux Étre, avoir été ou devenir ?
    Membre du personnel

    28 Juillet 2011
    23 788
    4 638
    163
    Homme
    IDF
    y'a rien qui indique une connexion sur un port usb, il se passe quoi coté tel qd tu branches ?
     
  20. JacKk

    JacKk Membre actif

    15 Avril 2012
    26
    1
    3
    Homme
    Rennes
    je vois la diode de charge,et il charge!j entend le son de connection!
    j étais en train de tester fastboot,j ai bien le menu"fastboot",et quand je:
    fastboot flash recovery twrp-3.2.1-0-capricorn.img
    il me met;
    "waiting for devices"
    merci de ta patience
     

Partager cette page

Utilisateurs lisant le sujet (Utilisateurs: 0, Invités: 0)